The Victron Phoenix Smart Inverter 24/1600 is a pure sine wave inverter with Bluetooth built in, fully configurable and monitored from a phone or tablet via the VictronConnect app.
Key features
- Proven reliability — the full-bridge, toroidal-transformer design is short-circuit proof and protected against overheating, whether from overload or high ambient temperature.
- High start-up power — enough surge capacity to start loads like power tools or transformer-based lighting.
- ECO mode — drops to standby when the load falls below a preset level, switching on briefly every 2.5 seconds (adjustable) to check if it's needed again, and staying on if the load exceeds the preset level.
- Remote on/off — wire a switch or relay to the two-pole connector, or switch its H (left) terminal to battery positive, or its L (right) terminal to battery negative or a vehicle chassis.
- Bluetooth and VE.Direct configuration and monitoring — low battery voltage alarm, cut-off and restart levels, dynamic (load-dependent) cut-off, output voltage (210–245V), frequency (50Hz or 60Hz), ECO mode, alarm relay, and live in/output voltage, load and alarms.
All electrical work must be performed by a licensed electrician.
Additional information
| Weight | 13.79 kg |
|---|---|
| Dimensions | 30 × 24 × 56 cm |
| Brand | Victron |
| Voltage | 24V |
