3.6V 18650 size 2500mAh cylindrical LiIon Cell : INR18650-25R

Samsung INR18650-25R Lithium Ion cylindrical battery.

• High capacity: 2500mAh
• High drain: max. continuous discharge current 20A
• High temperature: operating temperature - Charge = 0°C to +50°C; Discharge = -20°C to +75°C

Ideal for use in power tools.

*Warning: Not for E-Cig or Vape use.

Specifications

• Chemistry Lithium Ion (LiIon) Cylindrical
• Voltage 3.6V
• Watt Hour 9.0Wh
• Nominal Capacity 2.5Ah
• Maximum Continuous Discharge Current 20A
• Size 18650
• Width 18.33mm
• Height 64.85mm
• Weight 45g

Important Information Regarding Rechargeable Lithium Cells - LITHIUM ION (LiIon) & LITHIUM IRON PHOSPHATE (LiFePO4)

• Single unprotected cells are available to recognised customers. For safety information please read the Lithium Battery Safety document
• PLEASE NOTE: All lithium rechargeable cells/packs supplied by Mi Battery Engineering without a Protection Circuit Module (PCM) will require a duly signed Product Indemnity Waiver (PIW) Click here to download
• Do not attempt to charge these batteries using chargers for nickel based batteries or any charger not specifically designed for rechargeable lithium technology.
• This cell is manufactured for use in a battery pack assembly. It is not intended for use without a protection circuit. For equipment designed to use individual cells a protection circuit can be incorporated. MI Battery Engineering's current range of protected lithium ion cells can be viewed on this page.
• Lithium ion cells can be assembled into single or multi-cell battery packs by authorised pack assembly centres such as our company that have been approved for safety circuit assembly and Lithium Ion pack design.
• For information on the safety circuits, more commonly known as a PCM, please click here or follow the links to browse MI Battery Engineering's range of available PCM's for Lithium Ion and Lithium Iron Phosphate.
• MI Battery Engineering can also provide advice and components for intelligent Battery Management System's (BMS) addtional to or incorporating PCM's. It's recommended that battery packs especially those featuring complex series/parallel cell assemblies incorporate a BMS in their construction. For further information please consult our sales engineering staff.
• For battery pack design enquiries please contact us with your requirements. If you already have some parameters please click here for a Battery Application work sheet & email it to us.