Home » Products » PureLithium100Z Pure Energy Lithium 100Ah 12.8v Battery – 36 month warranty

PureLithium100Z Pure Energy Lithium 100Ah 12.8v Battery – 36 month warranty

SKU: 7426969695423Categories: , , , , , , , ,

$649.00 inc GST

(1 customer review)

In stock

Add to Cart

Why Choose the Pure Energy Lithium Blue Label


All Pure Energy Lithium batteries are High Quality, Safe LiFePo4 Deep Cycle batteries. They are a long lasting and lightweight alternative to the Lead Acid, AGM & GEL batteries used today. The Pure energy Blue Label Range is made from high quality Prismatic cells and they provide amazing value for money without the Quality and Safety issues we have observed in many low priced Lithium products. We have increased the sales volume such that we can now offer them at about half the price of comparable brands on sale in Australia - so maybe its time to make the change to Lithium! 


They are perfect for use in Storing Solar power and providing Deep Cycle power for Lights, Fridges and other loads in Caravans, Motorhomes, Campers, 4×4 and other similar applications. They maintain high voltage right throughout the discharge cycle, unlike most Lead Acid batteries which drop their voltage under load.


Featuring a built in Battery Management System for safety and long-life, Pure Energy Lithium batteries provide much greater usable capacity, allowing depths of discharge up to 90% repeatedly with a very high number of charge cycles. They provide approximately 3 – 4 times the cycle life of an AGM which has been discharged to 50%….and at roughly half the weight!


Many seemingly "Bargain" lithium batteries on the market today use low quality or second-hand cells. They may offer a long warranty, and some have sold in large quantities on Ebay, but we have seen many battery companies pop up and disappear over the last 12+ years, so they are unlikely to be around if you need them. We have examined most of the "low price bargain" brands over the last 18 months (Sold on Ebay, and also direct websites for warehouses in Sydney etc.).


Some have a fancy website or a call center in the CBD, but these "bargains" share common features:


  1. Poor electrical safety (rats-nest wiring, low current cabling, use of electrical tape to insulate the positive terminal inside).
  2. Cheap BMS, often a "credit card" type with no power transistors (liable to burn out at 30 - 40 Amps).
  3. Low grade, no name, low quality cells. One customer paid $1,900 for a set of four 100Ah batteries and only suspected an issue when the top came off one of them. Their website looked great (he showed us) but the small piece of electrical tape covering the positive terminal on the inside was already starting to burn through as it shorted to the case of one of the prismatic cells! A single piece of thin foam was the only other insulation / protection inside the case!
  4. The worst thing is that even cheap rubbish lithium batteries for $400 - $600 will work for a while at 10 - 50Amps or so, and they are amazingly light (lots of air inside), so people often use them for several months and don't suspect a thing until they try using them for a heavier load or notice the capacity is low when their solar is down. Even cheap Lithium's can work well, but the true capacity when they bring them in for testing is often 40 - 60% lower than it should be. Enough for a weekend trip with the solar input going, but not much more.

Why Buy From Every Battery

Reputation Of The Seller 
Every Battery has a long reputation for service excellence – with a 5-Star Excellent Rating on the independent review site Trustpilot and similar performance on Google Business rankings. We care about our customers and our reputation, which also underpins the warranty on the products we sell. We have Real Stores you can come to for advice and support.
Quality Of The Lithium Cells
We don’t use re-cycled (i.e. used) cells reclaimed from other sources such as laptop batteries. Pure Energy batteries are manufactured for us by a top Lithium Manufacturer. They also produce batteries for Telecommunication companies, RV and Military applications.
Quality Of The Battery Management System (BMS)
This can handle high continuous loads, which allows for both peak power when you need it (e.g. trolling motor, electric motor) but also higher continuous current to run inverters etc. The BMS balances and protects the cells inside the battery for optimum performance.
Construction Quality 
Pure Energy batteries feature a high-quality external case, and a protective interior for the cells and electronics.
Even with a BMS in place, internal micro-growths can cause short circuits in some lithium chemistries, leading to thermal run-away (causing fires which are very difficult to put out). With LiFePo4 Chemistry the Pure Lithium is safe to use and does not suffer from thermal runaway.

  • Nominal Voltage: 12.8V
  • Nominal Capacity: 100Ah
  • Energy: 1280Wh
  • Resistance: ≤10mΩ
  • Self-Discharge: <3% / Month
  • Cells:  Prismatic LiFeP04
  • Dimension (LxWxH): 330 x 173 x 220 mm
  • Approx. Weight: 11.1 kg
  • Terminal Type: M8
  • Terminal Torque: 80 ~ 100 in-lbs (9 ~ 11 N-m)
  • Case Material: ABS
  • Enclosure Protection: IP65
  • Warranty: 3 Years

Charge Specifications

  • Recommended Charge Current: 20A
  • Maximum Charge Current: 50A
  • Recommended Charge Voltage: 14.6V
  • Maximum Batteries in Series/Parallel:4

Discharge Specifications

  • Maximum Continuous Discharge Current: 100A
  • Peak Discharge Current: 120A (3 Seconds)
  • Recommended Low Voltage Disconnect: 11.0V (2.75V/Cell)
  • Discharge Cutoff Voltage: 8 V 

Temperature Performance 

  • Discharge Temperature: -20 ~ 60 ºC
  • Charge Temperature: 0 ~ 55 ºC
  • Storage Temperature: -20 ~ 45 ºC


  • Shipping Classification: UN 3480, CLASS 9


  • Do NOT short circuit, crush or disassemble.
  • Do NOT heat or incinerate.
  • Do NOT immerse in any liquid.
  • Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.

General Charging & Advice: LiFeP04 Deep Cycle Batteries:

  1. Many sellers of Lithium batteries use terms like “drop-in replacement” and imply that any old charging method will work. The reality is that Lithium Batteries are sensitive to charge voltages and lose capacity if repeatedly undercharged, trickle charged or overcharged.
  2. Most battery chargers and alternators can put some power into a Lithium Battery, but only Lithium chargers can fully and safely charge the batteries repeatedly. For example some Lithium batteries only balance the cells at "the top" of the charge cycle, so if the chargers output voltage is not high enough then the strings of cells inside will slowly go out of balance and this can cause big issues. 
  3. Even high-quality AGM Deep Cycle battery chargers which have a high enough voltage to avoid the above (i.e. 14.4 - 14.6V) and therefore can charge the battery can apply high frequency current pulses & damage the BMS if the charger switches into battery recovery mode or desulphation mode.
  4. The majority of LiFePo4 Batteries are not suitable for use under the bonnet (extreme heat) and are not designed for starting vehicles – i.e. do not have CCA ratings. Call our 1300 123 228 number if you need more information on this, as we can provide some models that do this via special order.
  5. Lithium Deep Cycle batteries do not like continuous maintenance or trickle charging, and most Lithium Chargers will back off charging completely and drop the voltage to accommodate this. The BMS may also shut off at 2% charge rate but ideally this should not be relied upon.
  6. The internal BMS will slowly discharge the battery even when it is not in use, or connected to an external load. We therefore recommend using a Lithium Battery charger, and top-up charges every 2 months or so. 
  7. Most over-discharge problems arise from a load being left connected to the battery for several weeks (e.g. in the Caravan small lights will slowly discharge the battery to low voltage). The BMS will then cut off the load, but this happens at 8V so when the vast majority of the power has been discharged. The BMS then continues to take a small amount of charge itself and this can result in over-discharged batteries. Using an external Low-Voltage Disconnect can help in this case, and the period of time that the battery can be left before the BMS "switches off" can be extended, which makes it easier to spot it and get it back onto charge again.
  8. If the BMS does "switch off" the voltage at the terminals can fluctuate, and depending on the design you may read 0V, or more likely somewhere in the 3 - 8V range of the MOSFET output rather than the usual 13V or more. If you find the battery in this stage, and it has only been like that for a short period, then most good Lithium chargers will work to recover the battery. They trickle charge the BMS at a low current, and then "kick-in" to a normal charge mode (bulk) after a while. Positive biasing the terminals even with a small 9V or 12V battery often has a similar effect, allowing the BMS to open up and charge to be accepted. Some older Redarc and other DC-DC systems will not kick in when the battery has switched off, as they were programmed to see a low voltage state as a fault, hence at the end of the drive your battery will still be flat!
  9. Note you should never leave the battery for weeks in a discharged state (as above), it may seem to recover ok, but if Lithium Plating has occurred in any of the cells, they are likely to fail prematurely at a later date due to dendritic (spiky internal) growth in the cells. The lesson is to disconnect the loads when you are storing the battery for long periods, plus use a Low Voltage Disconnect which cuts in well before the BMS has to, and if it does get over-discharged then put it back onto the charger within ideally a week or two. 
  10. Finally - Important note!!! Do not charge the battery below 0C (Freezing). All LiFePo4 batteries can power loads below freezing, but they should not be charged at temperatures below 0C. The BMS is programmed to prevent this, but again its best to avoid the possibility by keeping the battery inside (under a seat or bed would be ideal). If you do need to use the batteries in extreme cold there are versions available which use some of their capacity to power internal heating elements, call us if you need to know more on 1300 123 228. Without this heating element you can quickly damage the batteries if you charge them below 0C, and the higher the current used to charge it the worse the effect. 

Additional information

Weight11.1 kg
Dimensions334 × 175 × 219 cm

Pure Energy






1 review for PureLithium100Z Pure Energy Lithium 100Ah 12.8v Battery – 36 month warranty

  1. EB Team

    Our View: Amazing Value and performance from a lightweight, capable and safe Lithium Deep Cycle – and without all the quality and safety shortcuts seen on other products at this price point. Simple and robust construction from Quality Prismatic Cells, with a full 100Amp BMS.

Only logged in customers who have purchased this product may leave a review.

Our Most Popular Accessories