No.1 For Victron with Lowest Prices Guaranteed.
Number 1 for Victron in Australia. Buy from a Tier-1 distributor giving after-sales support & outlets from WA to QLD, NSW to VIC & TAS.
With fast deliveries from our Warehouses, and we also have Stores you can visit for pickup's in Melbourne, Sydney, Perth, Hobart, Gold Coast etc. plus if you see it elsewhere for a lower price we will match it. Some conditions apply for old or discontinued products etc.
Experts in Batteries and Solar: Package Deals to save you money!
Every Battery & Solar component to make your Victron solution complete. If you have not yet bought your batteries or solar panels you will be surprised at how competitive we can be on Victron Solar, Lithium & AGM packages.
We also have Lead-Crystal, AGM and Flooded Batteries from a host of other trusted brands. Plus all the cabling, fuses and accessories you need to do the job properly. If you need pre-sales advice just use the contact form on our website to ensure we capture all the relevant details about your needs.
100% Australian owned and operated - 14 years of trading.
We have delivered tens of thousands of orders across Australia across the last 14 years, and with thousands of 5 Star Reviews on Google and Trustpilot you can be assured we will look after you. At Every Battery our motto is "Great Advice & Friendly Service" and we mean it, with customers coming back year after year for all their battery, solar and charging needs.
We are the Sole importer / Distributor for superb OEM brands such Japan's Panasonic Automotive, and the Australian manufactured ANBI range of Isolators and Digital Pules Systems. For Victron we have the highest level (Tier 1) status and can assist you throughout your Victron journey.
Need Help?
We offer detailed after sales expertise on Victron, and with a 5 year warranty you are in good hands if you need warranty assistance at any stage. If you need pre-sales advice best email us a contact form from our website to ensure we capture all the relevant details about your individual needs.
Product Details:
6-35VDC Smart BatteryProtect 12/24V 65A
Protects the battery against excessive discharge and can be used as a system on/off switch
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The on/off input can be used as a system on/off switch.
12/24V auto ranging
The Smart BatteryProtect automatically detects system voltage one time only.
Bluetooth: programming made easy
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.
A special setting for Li-ion batteries
In this mode the BatteryProtect can be controlled by the VE.Bus BMS.
Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.
Ultra-low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.
Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V.
Ignition proof
No relays but MOSFET switches, and therefore no sparks.
Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds.
Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.
Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the battery voltage drops below the preset level. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 10.6 × 4.8 × 4 cm |
| Ah (capacity) | 65 |
| Brand | Victron |
| Condition | New |
|---|
