World Voltage / 12VDC input 1-2 cell lithium ion / lithium iron phosphate battery charger
1 of 2 (Enlarge)
World Voltage / 12VDC input 1-2 cell lithium ion / lithium iron phosphate battery charger
$45.95
Quantity:
Add to cart
 Checkout
  • About
  • Specs
100-240VAC (World Voltage) / 12VDC input independent channel 1-2 cell lithium ion / lithium iron phosphate battery charger and power bank.

 

  • Comes with SAA, MEPS approved 100-240VAC (world voltage) to 12VDC input power adaptor plus 12VDC input cigarette light connection car plug.
  • Two cell charger with independent channels to charge 1-2 3.6V/3.7V lithium ion cells or 3.2V lithium iron phosphate cells in sizes 10440, 14500, 14650, 16340, 17670, 18350, 18500, 18650, 18700, 22650, 25500, 26650 commonly used in LED torches, E-Cig's & other devices.
  • When used as a portable charger via USB output the product also uses overdischarge disconnection technology to prevent overdischarge (3.0V ±0.2V) of the lithium ion cell being used as the power source.

 

  • Width : 59mm
  • Height : 30.5mm
  • Length : 118mm
  • Weight : 86g

Three selectable charging currents

  • 250mA (±30mA) 
  • 500mA (±50mA) 
  • 1000mA (±80mA)


Three selectable charging voltages

  • 3.2V suitable for LiFePO4 batteries (3.6V termination voltage)
  • 3.6V suitable for LiIon batteries (4.2V termination voltage)
  • 3.8V suitable for LiIon batteries (4.35V termination voltage)
  • Charge re-activation if cell voltage drops below 3.9V if cells left in the charger. Ensures cells are always ready for use.
  • Over discharged cell recovery (cell voltage <2.0V). (Percentage of capacity recovery dependent on cell health).
  • Algorithm based TC/CC/CV charging system with reverse polarity, short circuit, overheat & overcharge protection.
    • Trickle current (cut-off current) @ 0.25A/0.5A: ≤60mA
    • Trickle current (cut-off current) @ 1.0A: ≤100mA