Victron Quattro 48 Volt 10000 Watt Inverter/Charger
- Additional information
- Reviews (0)
Quattro 48 Volt 10000 Watt Pure Sinewave Inverter/Charger.
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example shore – side power and a generator, or two generators. The Quattro will automatic ally connect to the active source.
Two AC Outputs
The main output has no – break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a w ater heater for example , can be connected to this output.
Virtually unlimited power thanks to parallel operation
Up to 10 Quattro unit s can o perate in parallel. Ten units 48/10000/140, for example, will provide 90kW / 100kVA output power and 1400 Amps cha rging capacity.
Three phase capability
Three units can be configured for three – phase output. But that’s no t all: up to 10 sets of three units can be parallel connected to provide 270kW / 300 kVA inverter power and more than 40 00A charging capacity.
See here for datasheet.
|Cont. AC power at 25 C (VA)||10000|
|Cont power at 25C/40 C (W)||9000|
|Output AC voltage/frequency||230VAC +/- 2% 50Hz +/- 0.1%|
|Input voltage range (V DC)||9.5 – 17 19 – 33 38 – 66|
|Max. efficiency (%)||
|Zero-load power (W)||35|
|Operating temperature range||-20 C to 50 C|
|Humidity (non condensing)||max 95%|
|Charge Voltabe 'absorption' (V DC)||57.6|
|Charge voltage 'float' (V DC)||55.2|
|Store mode (V DC)||52.8|
|Charge current house battery (A)||140|
|Charge current starter battery (A)||4(12V and 24V models only)|
|Battery temperature sensor||Yes|