Bluesolar MPPT 150/35 12V-48V Solar Charge controller Regulator Victron
Bluesolar MPPT 150/35 12V-48V Solar Charge controller Regulator Victron
Add to cart

Ultra fast Maximum Power Point Tracking (MPPT)  

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10%  compared to slower MPPT controllers.

Charge current up to 35A and PV Voltage up to 150V

The BlueSolar charge controller will charge a lower nominal-voltage battery with a higher nominal voltage PV array. The controller will automatically adjust to 12V, 24V or 48V nominal battery voltage. (Software tool is need to select 36V)

Advanced Maximum Power Point detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points may be present on the power voltage curve. Conventional MPPT's tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximise energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No Cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40 C (104 F)

Flexible charge algorithm

Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).  

Extensive electronic protection

Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection.  

Internal temperature sensor

Compensates absorption and float charge voltages for temperature.  

MPPT Controller Overview
MPPT 150/35 Datasheet