MH-C1090F Pro 10-Bank Rapid 9V NiMH Battery Charger from Powerex
Provides up to 10 rechargeable 7.2V, 8.4V, or 9.6V nickel-metal hydride (NiMH) batteries with a full charge in 2-3 hrs.
Each battery is charged to its full potential without the risk of overcharging. This is accomplished via a microprocessor, which automatically switches from rapid to trickle charge once the batteries are done charging, ensuring that they maintain their charge.
FLEX pulse charging conditions and enhances your batteries' performance during charging. Individual LEDs for each charging channel indicate when charging is complete by switching from a red light to a green one.
The charger can even revive older 9V batteries that are no longer accepting a charge.
Provides up to 10 rechargeable 7.2V, 8.4V, or 9.6V nickel-metal hydride (NiMH) batteries with a full charge in 2-3 hrs
- Rapid Charge Current: 70-90mA
- Trickle Charge Current: 10mA
- Charging Cell Configuration: One to Ten 9V Batteries (7.2V, 8.4V or 9.6V)
- Microprocessor: Negative Delta V, Ten Independent channels
- Charge Time: 120-160 minutes
- Power Supply Voltage Ouput: 15V 1000mA
*When Charging 7.2V and 8.4V Batteries:
The two central charging banks, as indicated in the diagram above, have slightly slower charging speed than the rest of the charger. It is normal for charging to terminate slightly later than the rest of the charging banks (usually no more than 30 minutes later than the other banks).
*When Charging 9.6V Batteries:
When charging 9.6V voltage batteries, the two central charging banks will terminate significantly slower than the other banks. Charging time may be as long as six hours. Therefore, if a two-hour charging time is needed, use the other eight charging banks. Nevertheless, batteries will be fully charged in the two central charging banks when the green LED is lit.