Projecta IC1000 7-Stage Battery Charger 12V 10A
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
The multi chemistry function allows you to set the charging profile to suit the battery's chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
The smaller models (7, 10, 15A) can be used as a power supply which is great as a memory saver when changing your vehicle battery so you don't lose important radio and computer information. You can also run 12V appliances direct from the battery clamps up to the rated output current, ideal for use around the house.
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger's performance. What's more, the chargers remember the last settings used even when the power has been turned off.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode. Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard. In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
Output voltage: 12V
Output current: 10A
Minimum start voltage: 2.5V
Back drain: 1mA
Size (mm): 182x61x108
Weight: 1 kg
Desulphation: High Frequency Pulse charge up to 11V
Soft start: 3.5A up to 12V
Bulk: 7A up to:
Absorption: Constant voltage until current drops to 1.05A
Equalisation: Contact current from 2.0A up to 16V then hold for 1 hour or 12 hour timeout
Analysis: Monitors battery for 90 sec
Recondition: Constant current of 1.05A for 4 hours limited to:
Deep Cycle 50-1400Ah